RACK & PINION ACTUATORS

GENERAL FEATURES

6500

Nm MAXIMUM TORQUE

140000

MANUFACTURED UNITS PER YEAR

14

DIFFERENT SIZES

  • ASR type: Spring return or ADA type: Double acting
  • Rack and pinion design
  • Rotation angle 90º ± 5º(by means of external travel stops)
  • Antifriction sliding bearings
  • Long life without maintenance
  • Working temperature:
    • -30 ºC to 100 ºC in Standard Construction
    • -15 ºC to 150 ºC with FKM O-rings (high temperature execution)
    • -40 ºC to 80 ºC with Silicone O-rings (low temperature execution)
    • -60 ºC to 80 ºC with Silicone O-rings and 316 pinion (extreme low temperature)
  • Maximum working pressure: 8 bar (120 psig)
  • Total safety for spring replacement

  • Mounting of solenoid valves acc. NAMUR Std
  • Mounting of devices acc. NAMUR VDI/VDE 3845 Std
  • Coupling according to ISO 5211 and DIN 3337
  • Position indicator can be used also to operate mechanical limit switches or proximity detectors
  • Options on request:
    • Fast acting
    • Stroke limiters
    • Epoxy coated body
    • Electroless Nickel Plated body and end caps
    • Locking Device
  • Fully traceability of critical components (body, stem, pistons, end caps)
  • Anti blow up stem

COATINGS FOR SPECIAL APPLICATIONS

Actreg Pneumatic Actuators are protected against external corrosion by proper material selection or surface treatment.

actuadores neumaticos, pneumatic actuators,hidraulic
actuadores neumaticos, pneumatic actuators,hidraulic
actuadores neumaticos, pneumatic actuators,hidraulic

BI-DIRECTIONAL TRAVEL STOPS

ACTREG pneumatic actuators are provided with bi-directional pinion travel stops

Side located stops allow a full ± 5º travel adjustment between 85º and 95º. These travel stops are designed to absorb the maximum rated torque of the actuator and the maximum impact loads associated with recommended travel speed

Adjustment of the anticlockwise and clockwise rotation limits is accomplished by unscrewing the locking nuts, turning the respective left and right stop studs to reduce or increase the travel angle and screwing the locking nuts

TESTING FOR ALL ACTUATORS

All actuators manufactured by ACTREG S.A. are individually tested in a state-of-art electronic testing facilities.

Testing is carried out to check the leakage in both internal and external, the angle of rotation and torque values.

All bodies are stamped with year, month of production, size and serial number.

RACK & PINION – PRODUCT RANGE

new_table_aDA_4
new_table_asr_6

Cookies Advice

We use cookies to ensure that we give you the best experience on our website. If you continue without changing your settings, we'll assume that you are happy to receive all cookies from this website. If you would like to change your preferences you may do so by following the instructions here ACEPTAR